Hold button down for 6 seconds (while PS3 is on): force disc to eject.Hold button down for two beeps (while PS3 is off): Enter PS3 diagnostic mode (repeat procedure twice).Hold button down for one beep 1 (while PS3 is off): Reset video to lowest settings.Hold button down for 6 seconds (while PS3 is on): turns off PS3.The following requires the power switch in the back to be on: The PS3 boots doing a lot of noise from the fan (dont panic, is normal and doesnt last for much time), at this point you can release the button.Turn power switch to the ON position (at the back of PS3 Fat), or connect the main power cable (at the back of PS3 Slim and SuperSlim).Press and hold button in the Switch board.Turn power switch to the OFF position (at the back of PS3 Fat), or disconnect the main power cable (at the back of PS3 Slim and SuperSlim).Is reported to work for PS3 Models CECHG and newer, as shown in this table When the PS3 boots in this mode the fan starts spinning in opposite direction and at 100% speed for a few time. The "fan test" mode allows to clean out the dust inside the PS3. 1.3 JIG / Factory Service Mode / manufacturerīesides the normal "retail" bootmode there are several other modes the console can boot or halt in:.
0 kommentar(er)
